一种新的弹塑性杂交应力元法

本文基于一个改进的弹塑性的Hellinger/Reis■ner 混合变分原理构造了一种用于解弹塑性问题的四节点等参杂交应力元.新的模型中,在单元内增加了等效应力增量、塑性等效应变增量及不协调位移变量,从而使单元内的屈服准则及流动法则平均得到满足,不协调位移改进了单元应力精度.计算表明,新的模型可以提高弹塑性杂交法的精度和计算效率.     

疲劳损伤问题中有效应力的一种定义

有效应力是损伤力学中的一个重要概念,这个概念的提出为用无损状态下的本构方程描述有损伤材料的行为提供了有效手段.本文探讨损伤力学中有效应力的定义,通过对损伤演化规律的分析,指出有效应力的一般定义不适用于疲劳损伤问题.本文认为,疲劳问题中的有效应力应该以等效寿命为基础,并根据剩余寿命的概念引入了疲劳损伤问题中有效应力的一种定义.     

An optical method to assess electromechanical coupling in ferroelectric ceramics

A new technique is described, which allows the assessment of elastic and inelastic regions around a macroscopic defect in ferroelectric-ferroelastic ceramics. The accuracy and robustness of the method are demonstrated on a PZT plate with a centered hole subjected to uni-axial compressive stresses. From the electrical potential distribution on the sample surface, the mechanical response of the material is obtained at different load levels.     

含孔软铁磁材料Mindlin板中弹性波散射问题

基于考虑磁弹相互作用的Mindlin板弯曲波动方程，采用波函数展开法，分析研究 了含孔软铁磁材料Mindlin板中弹性波散射与动应力集中问题，给出了问题的分析 解和数值算例. 通过分析发现：磁感应强度对动弯矩集中系数和动剪力集中系数有 增加的作用，特别是在低频的情况下.     

Two-dimensional stability problem for two interacting short fibers in a composite: In-line arrangement

A solution is found to a plane problem for a composite material reinforced with two in-line fibers and subjected to longitudinal compression. The problem formulation is based on the piecewise-homogeneous model and the three-dimensional theory of stability. The dependence of the critical strain and buckling mode on the distance between the fibers is studied for various mechanical and geometrical characteristics of the composite components.Translated from Prikladnaya Mekhanika, Vol. 40, No. 9, pp. 65–74, September 2004.     

Characterization of short duration stress pulses generated by impacting laminated carbon-fiber/epoxy composites with magnetic flyer plates

Short duration stress pulses are of particular interest in determining the interfacial crack tip instability criteria for the dynamic fracture behavior of laminated carbon-fiber/epoxy composites. However, the heterogeneous architectures of laminated composites can alter the characteristics of a stress pulse as it propagates toward a crack tip. This makes it difficult to use standard dynamic testing techniques for characterizing these materials, since these techniques assume the characteristics of the stress pulse do not change as a result of propagation and can therefore be unambiguously determined from impact conditions. This paper presents a novel experimental technique that has been developed for characterizing short duration stress pulse propagation in laminated composite materials. In this technique, a dynamic moiré interferometer is used to capture fringe patterns corresponding to displacement fields associated with short duration stress pulses that were generated by impacting 0° and 90°/0°/90° carbon-fiber/epoxy composites with a magnetic flyer plate. Appropriate dynamic testing conditions for capturing high fidelity fringe patterns were determined using the recently developed dynamic moiré fringe contrast factor. The effects of the composite architecture on the propagation of short duration stress pulses observed with the dynamic moiré interferometer were confirmed by transient dynamic finite element analysis. From comparisons of experimental and numerical data, it was determined that the impact conditions for the magnetic flyer plate and laminated composite will not necessarily be planar, which has a significant effect on the intensity and duration of the propagating stress pulse.     

Anisotropic plasticity for sheet metals using the concept of combined isotropic-kinematic hardening

Hill's 1948 anisotropic theory of plasticity (Hill, R., 1948. A theory of yielding and plastic flow of anisotropic metals. Proc. Roy. Soc. London A193, 281–297) is extended to include the concept of combined isotropic-kinematic hardening, and the objective of this paper is to validate the model so that it may be useful for analyses of sheet metal forming. Isotropic hardening and kinematic hardening may be experimentally observed in sheet metals, if yielding is defined by the proportional limit or by a small proof strain. In this paper, a single exponential term is used to describe isotropic hardening and Prager's linear kinematic hardening rule is applied for simplicity. It is shown that this model can satisfactorily describe both the yield stress and the plastic strain ratio, the R-ratio, observed in tension test of specimens cut at various angles measured from the rolling direction of the sheet. Kinematic hardening leads to a gradual change in the direction of the plastic strain increment, as the axial strain increases in the tension test; while in the traditional approach for sheet metal, this direction does not change due to the use of isotropic hardening.     

THE INTERACTION PROBLEM BETWEEN THE ELASTIC LINE INCLUSIONS

ＩｎｔｒｏｄｕｃｔｉｏｎＯｆａｌｌｔｈｅｆｉｂｅｒ＿ｒｅｉｎｆｏｒｃｅｄｃｏｍｐｏｓｉｔｅｍａｔｅｒｉａｌｓ,ｔｈｅｓｈｏｒｔ＿ｆｉｂｅｒｃｏｍｐｏｓｉｔｅｍａｔｅｒｉａｌｎｏｔｏｎｌｙｓｔｒｅｎｇｔｈｅｎｓｔｈｅｍａｔｒｉｘｂｕｔａｖｏｉｄｓｄｅｆｅｃｔｉｏｎｓｏｆｔｈｅｌｏｎｇ＿ｆｉｂｅｒｃｏｍｐｏｓｉｔｅｍａｔｅｒｉａｌａｓｗｅｌｌ.Ｔｈｅｍｉｃｒｏ＿ｍｅｃｈａｎｉｃｓａｂｏｕｔｉｔｓｕｃｈａｓｆｒａｃｔｕｒｅ ,ｆａｔｉｇｕｅａｎｄｄａｍａｇｅｉｓｖｅｒｙｃｏｍｐｌｅｘ .Ｉｎｔｈｅｐｒｅｖｉ…     

基于Hellinger-Reissner变分原理的应变梯度杂交元设计

从一般的偶应力理论出发，基于Hellinger-Reissner变分原理，通过对有限元 离散体系的位移试解引入非协调位移函数，得到了偶应力理论下有限元离散系统的能量相容 条件，并由此建立了应变梯度杂交元的应力函数优化条件. 根据该优化条件，构造了一 个C0类的平面4节点梯度杂交元，数值结果表明，该单元对可压缩和不可压缩状态的 梯度材料均可给出合理的数值结果，再现材料的尺度效应.     

Interaction of a screw dislocation with an interfacial edge crack in a two-phase piezoelectric material

The interaction of a screw dislocation with an interfacial edge crack in a two-phase piezoelectric medium is investigated. Closed-form solutions of the elastic and electrical fields induced by the screw dislocation are derived using the conformal mapping method in conjunction with the image principle. Based on the electroelastic fields derived, the stress and electric displacement intensity factors, the image force acting on the dislocation are given explicitly. We find that the stress and electric displacement intensity factors depend on the effective electroelastic material constants. In the case where one of two phases is purely elastic, the stress intensity factor and image force are plotted to illustrate the influences of electromechanical coupling effect, the position of the dislocation and the material properties on the interaction mechanism. The project supported by the Doctoral Foundation of Hebei Province (B2003113)